คำอธิบาย

19" GERMAN SERVER RACK 15U (60x80x85 cm.)

19" GERMAN SERVER RACK 15U (60x80x85 cm.)

Designed and Manufactured To comply Standards of ANSI/EIA-310D-1992 [Rev.EIA-310Cl,
IEC60297-1, IEC60297-2, BS5954 Part:2, DIN 41494, 19" Standard.
@ Modular Knock Down Easy to assembly, transportation.
@ Manufactured
- Made from 1.5mm Electro-Galvanized Steel Sheet.
- Mounting Pole, Frame structure and Base made from 2.0mm Electro-Galvanized
Steel Sheet.
- Castor Base Stand made from 3.0mm steel.
- 100% rust proof.
@ Structure It was mounted by wedge lock to increase strength.
@ Mounting Pole Designed to be C-shape angle with 1Ox10mm square punching hole to
increase strength and flexible to adjust freely with screened Rack unit [U) on the
mounting pole.
@ Front Door is the steel frame with Acrylic 5.0 mm. thickness with film protection and
the width of acrylic is 38 cm. [the height is being influenced by the size of the rack)
which is perforated tetragon surounding the acrylic [same as honney comb). Door
edge is bore with gray dust-proof rubber seal [3 fins). Security locks with 19" Germany
Master Key.
@ Rear Door is the steel door with perforated tetragon ventilation 50% of door's area
[same as honney comb) to prevent the heat accumulation inside the cabinet to extend
the life of all network equipments and servers. Door edge is bore with gray dust-proof
rubber seal [3 fins). Security locks with 19" Germany Master Key which is the same set
as the front door.
@ Hinge Made from 3 pieces of special high strength [ABS) or other materials
[asrequestedl, without disturbance noise and rust-free. The front and rear door can
reverse to change the opening direction from the left or right side by adjusting screw
at the nut of hinge.
@ Side Panels Was the steel frame with security lock and master key same as the front
door set and provided 19" Germany slide latch on the top part for easy removable.
The inside is 70 mm width vertical frame [Excluding for 15U Rack) for more strength.
@ Roof Cover Can be mounted the 4" fan sets, up to 6 fans maximum mounted for
ventilation and able to change to vented raised roof cover in optional.
@ Base It's same dimension as the cabinet for full weight support. The bottom are 3 parts
plinth and slide shutter with gray sponge for cable access and protect animal creep
into the cabinet, can be mounted the ventilating fan.
@ Pedestal Up and down adjustable stand with castor base. The 4 pedestal's base with
180° freely tilt to suit the slope floor and made from Black ABS to protect the electrostatic
and leaking electricity.
@ Castor Made from 50mm diameter of Black Nylon 6, swiveling at 360
° and convenience
to move, support the static load with 150kg/castor.
@ New Shine Light Gray Two-tone color painted by Electrostatic powder coat system with
international standards ASTM.
@ Grounding System 2.5mm copper wire with yellow and green color stripe which
connect between all removable part of rack.
@ Screw Set Provided screws, captive nuts, plastic washer with nickel plating and M6
standard.
@ Static Load Rating 1,200kg load, certified by KM UTT. The result shall be less than 3.0mm
or 0.14%.
@ Manufacturing and Distribution Certified by ISO 9001 : 2015
@ Index of Protection IP 20